Los edificios de paneles más altos de España

  1. Águila García, Alfonso del
  2. Gómez, I.
  3. Borsetti, Matteo
  4. Hernando Castro, Susana
  5. Fernéndez, C.
Journal:
Informes de la construcción

ISSN: 0020-0883

Year of publication: 2009

Volume: 61

Issue: 513

Pages: 59-72

Type: Article

DOI: 10.3989/IC.08.051 DIALNET GOOGLE SCHOLAR lock_openOpen access editor

More publications in: Informes de la construcción

Sustainable development goals

Abstract

This present article describes the building process of a 484 dwelling complex built with precast RC Load-Bearing wall panels. This building, which reaches 20 storey high, includes too Shops, Offices, 4 garage floors and central services. The main interest of this complex is that it gets to be the highest building made with precast RC load panels in Spain. The building system which has been used is INDAGSA precast system. This is well known due to its approval technical document, which was conceived by the �Eduardo Torroja� Construction Sciences Institute (IETcc) (DIT 452). INDAGSA works are also known to be accurate, tide up and clean. Due to these conditions, visits to the site were possible not only for the researchers but for the students of �Industrialization & Prefabrication building systems�. This article gives a good description of the industrialized systems involved in the building, trough this we try to show the capacities of precast RC load panel buildings, its advantages and the possibilities for evolution.

Bibliographic References

  • (1) B. Lewicki, “Edificación de viviendas prefabricadas con elementos de grandes dimensiones”. Ed. IETcc. 1968.
  • (2) R. von Halász y G. Tantow. “La construcción con grandes elementos prefabricados”. Ed. Urmo, 1972.
  • (3) A. del Águila, “Las tecnologías de la industrialización de los edificos de viviendas”. 2 tomos. Ed. COAM 1987.
  • (4) A. del Águila, “La industrialización en la edificación de viviendas”. Tomo 1: los Sistemas. Ed. Mairea 2006 (3).
  • (5) Ache, “Recomendaciones para el proyecto, ejecución y montaje de elementos prefabricados”. Ed. Colegio ICCP 2004.
  • (6) A.J. Morris, “El hormigón premoldeado en la arquitectura”. Ed. G. Gili. 1978.
  • (7) ATEP, “Estructuras de la edificación prefabricadas”. 1996.
  • (8) C.I.B, “Recommandations internacionales pour les Structures en Panneaux”. Ed. As. Italiana del Cemento. Roma.
  • (9) M. y P. Anderson, “Prefab prototypes: site-specific design for offsite construction”. Ed. Princeton Architectural Press. New York, 2007.
  • (10) “Contemporary prefab houses”. Ed. Daab GMBH, 2007.
  • (11) CATED, “Joints”. Ed. du Moniteur. París, 1982.
Data source: Dialnet